Computer has battery or a special chip which keeps computers (CMOS) settings and also runs the computer lock even after the computer itself is turned off. When you have to reset the date and time on the computer every time you start it, you will need to replace the battery of your computer. This procedure is applicable to IBM-compatible computers which have a replaceable battery or the connector for the space battery. At this time, this article is going to deliver several tips to change the battery in a computer. So, just check out the following tips.
The first thing that you should do is to record the settings of the current CMOS first. Then, you should turn on or restart the computer. When the computer settings are displayed on the screen, you have to press the Pause key or the Break key in a way to freeze the computer display.
The second thing that you need to do is to press the Print Screen key for printing the display, or just write the settings on paper. You should keep this information in case you are losing the settings of your computer.
The third thing is to turn off your computer and unplug it. After that, you should remove the cover.
The fourth thing that you need to do is to record the battery type which is currently installed, but do not remove it. The lithium or the alkaline batteries are in the holders attached to the motherboard. The built-in batteries are then soldered onto the motherboard, but the connector must be available for the space battery. In this step, you have to note the type of the connector.
The fifth thing is to buy a replacement battery.
The next thing is to remove your existing battery and then replace it with new battery in exactly the same configuration. Spare batteries with the connector usually fit one way only, but you should check the computer documentation.